Apollo Needle, Nozzle & Air Cap Sets (1.3mm, 1.5mm, 1.8mm, 2.0mm needle/nozzle sets; "B‐HS" &  "C‐HS" air caps) 22.5 GPM then locks in the upright

then locks in the upright position for painting straight lines

110V automatic tank drain with dual timers eliminates daily maintenance

140° F - Max Water Temp | 1/2” M - Inlet Thread | 3/8”M - Discharge Thread | 4

low-water and low-fuel protection that shuts down burner when incoming water and fuel are insufficient or interrupted

This is a great one-gun striping unit

Apollo Needle, Nozzle & Air Cap Sets (1.3mm, 1.5mm, 1.8mm, 2.0mm needle/nozzle sets; "B‐HS" &  "C‐HS" air caps) 22.5 GPM then locks in the uprightSelect from these Genuine Apollo needle, nozzle and color coded air cap options to match your material viscosity, turbine model and specific application needs. Parts may be ordered separately or in sets (see below charts). Includes: nozzles & needles (0. 8mm, 1. 3mm, 1. 5mm, 2. 0mm) Air caps (B HS, C HS) Size Material Recommendations Needle Part # Nozzle Part # Needle Nozzle Set Part # Air Caps Air Cap Part # 0. 8mm Inks, Dyes, Stains, extremely thin