Misalignment Spacer Set, High, 3/4" to 5/8", 1-3/4", (DM5958G) esr3694275 and each u-joint requires four

and each u-joint requires four clips

Use the drop down menu to add ball joints and spindle studs to the package

and most of the ones you find at hardware stores will not (they're too thin)

Drag Link End Tapered Hole (Small End

Dana 60 spindle bearing kit

Misalignment Spacer Set, High, 3/4" to 5/8", 1-3/4", (DM5958G) esr3694275 and each u-joint requires fourThis is for a PAIR of 3 4" to 5 8" high misalignment spacers that fit a 1 3 4" bracket with a 5 8" hole. These are made from stainless steel and conform to tight tolerances so they fit snugly into a Heim joint and will stand the test of time. Often times, after the Heim joint wears out, these are swapped over to the new Heim joint. On a typical Heim joint the overall width of the unit (Heim joint with misalignment spacers installed) is 1 3 4". This