Jim Root Strat - Thin Shiny White .060" / 1.52mm Thickness, No Bevelled Edge luxe Remove backing to expose the

Remove backing to expose the adhesive glue and then stick straight onto the instrument

The capacitor slug is fitted into a precise historic reproduction printed paper tube

Diameter of body fit bushes - 10mm

immediate attack

Adaptor bushing set for use in converting a modern 10mm drilled headstock to accept vintage Kluson-stamped steel tuning machines with the metric 6mm string post diameter used specifically between 1995 and 2006

Jim Root Strat - Thin Shiny White .060" / 1.52mm Thickness, No Bevelled Edge luxe Remove backing to expose theThis Jim Root signature pickguard is made specifically for the signature Fender Jim Root Stratocaster. This model features just one volume pot hole and the selector switch is in an alternative position compared to a regular Strat. The Humbucker cutouts are specifically cut to take the EMG 60 and 81 models that are fitted as standard on the Jim Root signature guitar. Many manufacturers may make a similar model but this does not mean every pickguard of